APISQUEEN AQ1020 One/Two Set 24-50.4V all-metal underwater thruster 10-48Kg thrust For Boats
APISQUEEN newly developed underwater thruster.
Solution for underwater thruster packages that do not operate or only one thruster operates (demonstrated in the video using an upgraded version of the U92):
AQ1020 One Set 24V
Size: 163*120mm
Support voltage: 24V
No-load current: 1.9A
Load current: 14.5A
Motor KV value: 100KV
Power: 425W(30V)
Speed of propulsion: 5-10km/h
Thrust: 10Kg(24V)
Working environment: fresh water, sea water
AQ1020 One Set 48V
Size: 163*120mm
Support voltage: 48V
No-load current: 2.9A
Load current: 30A
Motor KV value: 100KV
Power: 1200W(50V)
Speed of propulsion: 7-12km/h
Thrust: 24KG(48V)
Working environment: fresh water, sea water
AQ1020 Two Set 24V
Size: 163*120mm
Support voltage: 24V
Set no-load current: 3.8A
Set load current: 29A
Motor KV value: 100KV
Set power: 850W(30V)/2400W(50V)
Set thrust: 20Kg (total thrust of two propellers)
Speed of propulsion: 5-10km/h
Weight of propulsion: 0-550KG
Working environment: fresh water, sea water
AQ1020 Two Set 48V
Size: 163*120mm
Support voltage: 48V
Set no-load current: 3.8A
Set load current: 29A
Motor KV value: 100KV
Power: 850W(30V)/2400W(50V)
Thrust: 48Kg(combined thrust of two thrusters)
Propelling speed: 7-12km/h
Can push the ship weight: 0-1000KG
Working environment: fresh water, sea water


Advantages:
(1) ESC built-in thruster, direct water-cooling, can continue to stabilize the maximum throttle output.
(2) Very small current, increase battery life, reduce battery cost, wider choice of batteries, ordinary car batteries can also be used.
(3) Wide voltage support, 24V version can support up to 30V, 48V version can support up to 50.2V voltage.
(4) Modular design, easy to install, disassemble and carry.
(5) large thrust, can push 3-4 people kayak or inflatable boat, etc..
(6) High quality, anti-corrosion, can be used in seawater freshwater environment.
(7) The wire length from each thruster to the white waterproof box is 1.5 meters.
ABOUT PWM
PWM full name is (Pulse-width modulation). It is also called duty cycle signal, which indicates the proportion of the high level duration to the whole signal period. 2ms for the whole period of PWM, 1.5ms stop, 1.5-2ms forward, 1.5-1ms reverse.
From the diagram, we can clearly see that when PWM is 75% (1.5ms), the motor stops rotating, when PWM is 50% (1ms), the motor rotates in reverse, and when PWM is 100% (2ms) the motor rotates in forward.Of course ESC will not only make the motor turn forward and reverse, but can adjust the speed of motor rotation by the duty cycle size of PWM. When the PWM is gradually changed from 75% to 50%, the motor will keep reversing and accelerating from stop until the reverse rotation reaches the maximum. And when PWM is gradually changed from 75% to 100%, the motor is continuously accelerated from stop to forward until the forward rotation reaches the maximum value. That is, PWM is a signal that can be continuously varied, and the effective range is from 50% to 100%.
The frequency of PWM signal is 50hz, 100hz, 200hz or 500hz, etc. The higher the control frequency, the shorter the period, the shorter the control interval, and the faster the ESC and motor response speed The faster the ESC and motor response. Conversely, the lower the control frequency, the longer the period, the longer the control interval, and the slower the ESC and motor response.
Note: Thrusts in the test chart are for 1 thruster.

AQ1020 Underwater thruster insert use:
1, can be used with fin base quick plug application;

Dimensions without plug-in:

Dimensions with plug-in:

DESCRIPTION OF THE UNDERWATER THRUSTERS CW AND CCW
About points (lower right corner of the store page):
★5 points for every $1 spent;
★For every 100 points redeemed, you can get a $1.00 discount on the entire order;
Applicable to orders of any amount.How to use points:
1. Redeem in the smile panel.
2. Redeem at checkout.