APISQUEEN 24V/12V TWO U92 SET UNDERWATER THRUSTER WITH REMOTE CONTROL FOR KAYAKS, INFLATABLE BOATS, PADDLE BOARDS, ETC.

  • $380.81
    Unit price per 
Shipping calculated at checkout.




Set of 2 U92 thrusters for forward, backward, left and right turns of the boat.

Set includes: U92 CW*1, U92 CCW*1, ESC*2, RC*1, waterproof case*1, mounting base*2, mounting bottom*2, double-sided velcro*2.

Voltage: 12/24V
Maximum current: 45A
Thrust: 9.2Kg
Output power: 1280W
ESC :100A (waterproof)
Thruster material: composite material, one-piece molding.
Notice:
U92 150KV support voltage: 12-24V (3-6S, Can support fully charged 29.2V LiFePO4 battery (nominal 24V)).

About ESC:

  • 32BIT MCU, very responsiveand smooth.
  • Powerful switching BEC and voltage adjustable.
  • Waterproof, safe more and enjoy more.
  • Premium Mosfets and ceramic capacitors.
  • Powerful throttle control: throttle rate, throttle curve and throttle softening values can be adjustable.
  • Advanced motor control algorithmdrives perfectly with low speed and get a very powerful acceleration 
  • Multiple protections: Low voltage protection, overheat protectionand throttle out of control protection.
  • Easy to use and keep upgrading.
  • PWM signal control, the input frequency is 50-480HZ, and the output frequency is 8-32khz;
  • Bidirectional ESC, 1ms-1.5ms-2ms, 1.5ms is the median value.

About remote control:

(1) The remote control is not waterproof;
(2) All the operation settings of the remote control have been completed, directly turn on the switch and toggle the rocker to use it.


    ABOUT PWM 

    PWM full name is (Pulse-width modulation). It is also called duty cycle signal, which indicates the proportion of the high level duration to the whole signal period. 2ms for the whole period of PWM, 1.5ms stop, 1.5-2ms forward, 1.5-1ms reverse.

    From the diagram, we can clearly see that when PWM is 75% (1.5ms), the motor stops rotating, when PWM is 50% (1ms), the motor rotates in reverse, and when PWM is 100% (2ms) the motor rotates in forward.Of course ESC will not only make the motor turn forward and reverse, but can adjust the speed of motor rotation by the duty cycle size of PWM. When the PWM is gradually changed from 75% to 50%, the motor will keep reversing and accelerating from stop until the reverse rotation reaches the maximum. And when PWM is gradually changed from 75% to 100%, the motor is continuously accelerated from stop to forward until the forward rotation reaches the maximum value. That is, PWM is a signal that can be continuously varied, and the effective range is from 50% to 100%.

    The frequency of PWM signal is 50hz, 100hz, 200hz or 500hz, etc. The higher the control frequency, the shorter the period, the shorter the control interval, and the faster the ESC and motor response speed The faster the ESC and motor response. Conversely, the lower the control frequency, the longer the period, the longer the control interval, and the slower the ESC and motor response.


    Shipment list:


    Customer Reviews

    Based on 10 reviews
    80%
    (8)
    10%
    (1)
    0%
    (0)
    0%
    (0)
    10%
    (1)
    E
    Edward J Kramer Kramer
    Received but not yet installed

    All the components are as advertised. They all seem to be substantial enough for my purpose. Plan to install on a Jackson Cuda LT. I need to do some custom mounts before I can test. Would like to add info once i get the mounts designed, made, installed, and test the setup.

    M
    Michael Parisien
    Good

    Everything working good

    R
    Roland Tomson

    APISQUEEN 24V/12V TWO U92 SET UNDERWATER THRUSTER WITH REMOTE CONTROL FOR KAYAKS, INFLATABLE BOATS, PADDLE BOARDS, ETC.

    Á
    Ásztai Pál
    Bekapcsoláskor leégett a vezérlő

    Kedves Lynn!

    Kiszállították az új vezérlőket. Beszereltem és tökéletesen működik.

    Köszönöm szépen az alkatrész kicserélését.

    Jár az 5 csillag!

    Á
    Ásztai Pál
    Burnt controller when turned on

    Dear Administrator!
    In their reply letter, they wrote that incorrect polarity could have caused the damage to the controller. I am 65 years old, with 40 years of professional qualification and experience as a high-voltage electrician. My basic knowledge is the correct polarity when installing a direct current device. Please help, what other problem could have caused the damage to the controller.

    Sincerely, Imre Ásztai

    I'm sorry to call you in trouble.
    We have re-couriered you a new control box` (at no cost to you).