U01 Double Engine Set Graphic Tutorial
Posted by Fengyukun on
U01 dual-engine kit tutorial is here, follow us to install it quickly and easily.
U01 Underwater Thruster Kit includes the following products:
U01 Underwater Thruster Kit includes the following products:
①First, we turn on the power and adjust it to 16v.
Connect the three-phase line of the thruster to the three-phase line of the ESC.
②Connect the power cable of the ESC to the 1:3 adapter cable
③Connect the signal line of the ESC to the receiver
(Receiver Description)
④The signal line of the left ESC is inserted into channel 1, and the signal line of the right ESC is inserted into channel 2. (Pay attention to the direction of the plugging, the white line should be plugged in the direction marked with numbers.)
⑤Connect the power supply module xt60 connector (input end) to the adapter cable.
⑥Plug the output end of the power supply module into any channel 3-5 of the receiver. Pay attention to the connection direction. The white wire should be connected in the direction marked with a number (the function of the power supply module is to power the receiver. This product's ESC does not have a built-in power supply module, so an external power supply module is required).
⑦⑧Turn on the remote control, and then connect the adapter cable to the power plug.
★★★After connecting the power supply, wait for the ESC to pass the self-test (prompt sound: beep~beep~beep~~beep~~~~beep~).
▶Finally, the operation of the propeller:
Push the joystick of the remote control upward, the left and right propellers blow air forward and move forward;
Pull the joystick of the remote control downward, the left and right propellers blow air backward and move backward.
If the order of the front and rear air outlet is incorrect, you can change the direction of the blade rotation by swapping any two of the three-phase lines.
Push the joystick to the left, the left propeller blows air backward, the right propeller blows air forward, and turns left.
Push the joystick to the right, the right propeller blows air backward, the left propeller blows air forward, and turns right.
If the order of the left and right air outlet is incorrect, you can change the order of the left and right air outlet by swapping the two electric control signal lines.
Share this post
- 0 comments
- Tags: propeller, Thruster