APISQUEEN high-voltage 12-50.4V one-way/two-way control 80A ESC, supports USB parameter adjustment board for quick parameter adjustment, used for brushless motors/underwater thrusters, etc.

$71.50
Unit price per
Save $9.50

Shipping calculated at checkout.

Model:Feather 80A
Continuous current:80A
Peak current(10s):90A
Voltage :16-50.4V
Whether programmable upgrade :Yes
BEC Output :NO
PWM Output :8-32KHz
Weight:88g
Dimension:74x23.5x27mm

Software download link (click on the link to download): https://cdn.shopifycdn.net/s/files/1/0621/5493/2452/files/ApisQueen_tool.zip?v=1677690776

【If you can't find the com port, you need to download and install Ch340 or Ch341 driver. Connect the computer and ESC signal cable with Usb, click Tools, select com port, click Connect, then power on the ESC, confirm the connection is successful, then Readpara to read the parameters, then modify the corresponding parameters, then click writepara to write and save.】

A1: RunMode

Forward/Brake：

This is racing mode, under this mode, motor only can run forward, push throttle above neutral, it runs forward, push throttle under neutral, it brakes.

FWD/Brake/Reverse:

This is training mode, when the first time to push throttle to backward range, it brakes, not run backward, only when you push back throttle to neutral again, then if you push throttle to backward range, it will run backward.

FWD/Reverse:

This mode is mostly used for crawler, when you push throttle from forward range to backward range, it will reverse directly; work the same if you push throttle from backward range to forward range.

Forward：

This is only one way, no reverse and brake.

A2：Low Voltage Protection

No protect/SLOW-DOWN(Half power)/CUT-OFF（Shutdown）

A3: Battery Type

Please select the right battery type if your battery is not LIPO as default, so that the battery cells can be detected correctly. It supports: LIHV/LIPO/NIMH/LIFE.

A4：Battery Cells

You can set battery cells manually or set as AUTO to detect battery cells automatically.

When you power on ESC and motor is connected, you will hear beeps” ♪ ….”, this is to tell you how many cells are detected, one cell beeps” ♪ ”, two cells beeps” ♪♪ ” and so on. If battery cells are not detected correctly, please set manually.

A5: CELL VOLTAGE

You can set the cutoff protection voltage for each cell. If you choose LIHV or LIPO, the voltage value is referring the down line: 2.9, 3, 3.1, 3.2, 3.3, 3.4, 3.5; if you choose LIFE, the voltage value is referring the up line: 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8; there is no low voltage protection for NIMH battery.

A6: ESC Thermal Protect

You can set the temperature degree to protect your ESC from burning because temperature is too high. Some products may don’t support temperature protection.

A7: PWM Frequency

Frequency is higher, more smooth for your motor and also will increase ESC temperature, please select the suitable value accordingly.

A8: Min Power

This is to set min power of ESC, when starting motor with a small throttle, the bigger of the value set, the faster of motor speed.

A9: DIRECTION

When using sensorless motor, if you want to change motor spin direction, you can exchange any two of the three motor wires, you can also change with this option.

A10: BEC Voltage

This series boat ESCs are fixed with 5.5V as default, not programmable, if you need 7.4V or adjustable, please get confirmation from us before you make order.

A11: SyncRectify

Generally ON is for application requires fast response in stop; OFF is for application requires stop smoothly naturally.

B1: Max Reverse Strength

This is to set backward full speed percentage compared with forward full speed.

B2: MAX Brake Strength
Brake Strength is to set the max brake strength grade.

B3: Brake Rate
This is to control brake response speed, the lower means brake response slower, the higher means the brake response faster.

B4: Brake Frequency
Frequency is set lower, motor with harder brake force; frequency is set higher, motor with more smooth brake force

B5: Motor Rev Rate

This is to adjust switching rate in reverse, the bigger value, and the faster changed.

B6: Throttle Rate

This is to Control acceleration of throttle, lower means acceleration is slower, higher means acceleration is higher.

B7: Neutral Width

This is to set width of neutral, to that to make a better experience for different racers.

B8: THROTTLE CURVE

This is to set throttle curve.

B9：Soften Value

This is to soften throttle curve in MODIFY racing, 0 means no softening effect, 7 means strong softening effect.

B10: Timing

You can set timing manually.

B11: BEEP ON/OFF

Set beeps on or off manually.

If you plan to use microcontroller control, please refer to the blog:How can I use a Raspberry Pi 4B to send a PWM signal to an ESC to control an underwater thruster?